• TYP IP
    • PIR wall-panel Isopar® Typ IP / FRIGO Typ IP
      light, stable and visually variable wall covering, with an easy-to-plan grid dimension of 1.000 mm
      …more details

  • TYP IPE
    • PIR wall-panel Isopar® Elegant Typ IPE
      wall panel with covered fixation. The noble facade in unison with architectural design freedom offers high standards architects and planners. It can be laid horizontally and vertically. …more details

  • TYP IC
    • PIR roof-panel Isocopre® Typ IC
      high-quality static insulation panel for the commercial and industrial builing industry as well as for agricultural buildings.
      …more details

  • TYP EF
    • Fire protection panel roof Eurofire® Type EF
      Fire protection panel with non-combustible insulation core class 0/A.
      …more details

  • TYP IF
    • Fire protection panel wall Isoparfire® Type IF
      Fire protection panel with non-combustible insulation core class 0/A.
      …more details

  • TYP IFE
    • Fire protection panel wall Isoparfire® Elegant Type IFE
      Fire protection panel with non-combustible insulation core class 0/A and covered fixation.
      …more details

de / en es / it

PIR wall-panel Isopar® Elegant Typ IPE

aesthetic noble facade with concealed fixing for architects and planners with the highest demands in use at commercial and industrial cold stores. It can be laid horizontally and vertically.
 

 

 
 
• noble facade for high demand in visually and optical layout
• covered fixation
• horizontally and vertically installation
• core thickness from 60 mm up to cooling-solutions from 200 mm
• „made in Germany”



 


MANUFACTORING TOLERANCES

DIN EN 14509
All materials used for the panel production correspond to the technical standards and regulations.
The limit dimensions correspond to DIN EN 14509-appendix D.

Element lenght ≤ 3.000 mm ± 5 mm
Element lenght ≥ 3.000 mm ± 10 mm
Element width ± 2 mm
Element strenght ≤ 100 mm ± 2 mm 
Element strenght ≥ 100 mm ± 2 %
Lenghtwise and crosswise curvature
2 mm/m lenght, however no more than 10 mm
8.5 mm/m width when smooth profiles h ≤ 10 mm
10 mm/m width when other profile depths h ≥ 10 mm

COVER LAYERS
Outside: Steel sheet 0.6 mm, ≥ 280 MPa or ≥ 320 MPa, strip galvanized 275 g/m² with 25 µm Polyester painting
                (according to DIN 18807 part 3)
Inside:   Steel sheet 0.6/0.5 mm, ≥ 280 MPa or ≥ 320 MPa, strip galvanized 275 g/m² with 25 µm Polyester painting
                (according to DIN 18807 part 3)

SURFACE PERFORMANCE
Outside: Trapezoid profile 37/200 mm according to DIN 18807
Inside:    slightly lined (45.5/45.5), for an extra chrage with smooth inside - however, due to production technical
                 reasons slight visual limitations possible.

INSULATION CORE
Poly-isocyanurate-rigid foam PIR WLS 023, approx. 96% closed celled, fully connected to steel sheet cover layers.

PRODUCTION LENGTH / WARRANTY
Up to maximum 22.000 mm, depending on the panel thickness. If panel core between 60 and 80 mm thick,
a maximum delivery lenght of 16.000 mm is recommended, to avoid panel deformations as well as bucklings during (un-)loading and laying.

AIRBORNE SOUND INSULATION

Rw(C:Ctr) 25 dB to EN 14509:2007

APPROVAL
• general building approval for use as roof and wall, Z-10.4-658,
   DIBt Berlin.
• WATERTIGHTNESS acc. EN 14509, IFT Rosenheim.
• AIR PERMEABELITY acc. EN 12865, EN 1027 and prEN 15601,
   IFT Rosenheim.

QUALITY MONITORING
iS -engineering Darmstadt, TU Darmstadt, MFPA Leipzig

ASSOCIATION MEMBER
FIW München, IBU Berlin, IFBS

FACTORY MONITORING
ISO 9001:2008, CE-Kennzeichnung CSI 0497

FIRE PROTECTION
PIR B-s2;d0 according to test EN 13501.1
Euro-Class B-s2;d0

STATICS
See loader tables under www.lattonedil.de in download field ”technical center”.